Linkrunner At 2000 Firmware Update < Hot >

Connect the USB cable from the PC to the mini-USB port on the top of the LinkRunner AT 2000. Turn the LinkRunner ON.

| Pros | Cons | | :--- | :--- | | Accurate 802.3bt PoE testing | Risk of bricking (low if you follow steps) | | Faster switch discovery | Requires Windows PC (no Mac support) | | IPv6 link-local support | Resets saved network profiles | | Bug fix for "False Wiremap Open" | Takes 10 minutes of downtime | linkrunner at 2000 firmware update

: The Windows application required to interface with the device. Latest Firmware File : Look for the most recent version, such as v2.5.4 Build 1110 2. Connect the Device Connect the USB cable from the PC to

The update takes about 5 minutes. The unit will reboot automatically; do not disconnect the USB cable until the Manager software confirms the process is finished. Why Keep Your LinkRunner Updated? Latest Firmware File : Look for the most

Updating the firmware on the is essential for maintaining accuracy in network testing and accessing the latest features, such as improved PoE measurements and link identification . While the device is officially discontinued, it remains supported by NetAlly through September 30, 2027. Preparation Requirements