Phico D0 94v0 Lcd Display Datasheet Pdf [repack]

: A UL certification rating for the PCB's flame retardancy, not a model identifier.

In terms of hardware interface, a Phico D0 series module usually features a 14-pin or 16-pin header. Pins 1 through 6 handle power and control signals—specifically Ground, VCC (usually 5V), Contrast Adjustment (V0), Register Select (RS), Read/Write (RW), and Enable (E). Pins 7 through 14 comprise the 8-bit data bus. If the module has 16 pins, the final two pins are dedicated to the LED backlight anode and cathode. phico d0 94v0 lcd display datasheet pdf

The code "D0" is non-standard but typically refers to a variant in a series. Given the context of small LCDs, this likely points to a parallel interface using the Hitachi HD44780 (or equivalent) controller. Most character LCDs with a 94V0 rating feature a 16-pin interface (or 14-pin for simple versions). The "D0" might denote the specific backlight color (e.g., White or Blue) or a specific temperature range (Standard vs. Wide). Without a genuine PHICO datasheet, one must infer the electrical characteristics: logic voltage of 5V (or 3.3V for modern variants), typical contrast adjustment via a potentiometer on pin 3 (V0), and a default character set of 5x8 dots. : A UL certification rating for the PCB's