: Approximately 730mm x 365mm x 320mm (28.7" x 14.4" x 12.6"). Enclosure Type : 3-way bass-reflex (ported) cabinet.
Unlike standard 2-way or 3-way speakers, the AT-40 utilizes a sophisticated 4-way driver configuration. This allows the speaker to dedicate specific drivers to specific frequency ranges, ensuring that vocals remain clear, mids are present, and highs sparkle without distortion, even at high volumes. cerwin vega at-40 specs
The AT series remains popular among vintage audio collectors for its durability and distinct aesthetic, often featuring the signature orange-ringed woofers. While many modern receivers can drive a 6-ohm load, enthusiasts often recommend using high-quality power amplifiers to fully exploit the speaker's dynamic range and headroom. to other models in the AT series, or These Speakers Absolutely Changed My Life : Approximately 730mm x 365mm x 320mm (28
The is a vintage floor-standing speaker known for its high efficiency and punchy bass, typical of the AT (Advanced Technology) series produced in the late 1980s and early 1990s. Notably, for the European market, these speakers were often manufactured at the Dali factory in Denmark under license. Technical Specifications This allows the speaker to dedicate specific drivers
| Specification | Detail | | :--- | :--- | | | 4-Way Floor Standing Speaker | | Woofer | 12" Cast Frame High-Excursion | | Midrange | Dual 5.25" Treated Paper Cones | | Tweeter | 1" Soft Dome (Cerwin-Vega "Eyes") | | Super Tweeter | 1" Cone Type (Extended High Output) | | Frequency Response | 30 Hz – 22 kHz | | Sensitivity | 98 dB (1 Watt / 1 Meter) | | Nominal Impedance | 8 Ohms | | Power Handling | 300 Watts (Maximum) | | Crossover Frequencies | 250 Hz / 2.5 kHz / 8 kHz | | Dimensions (Approx) | 38" H x 15" W x 13" D | | Weight (Per Speaker) | ~45 lbs |
. While the massive AT-100 (AT-15) often steals the spotlight, its smaller sibling, the Cerwin-Vega AT-40